CALL US : 1300 83 99 66

Helle Alden No.76 Fixed Blade Knife

Helle Alden No.76 Fixed Blade KnifeHelle Alden No.76 Fixed Blade Knife
Move your mouse over image or click to enlarge

Helle Alden No.76 Fixed Blade Knife

 Sold Out 
  • 0 Units in Stock
  • Manufactured by: Helle - Norway


The Alden is named after the island Alden. Alden is still an important landmark for Fishermen coming home from the sea. The island is situated just of the coast from where the Helle factory is situated.

The Alden has a non-laminated stainless steel blade (12C27) and curly birch handle with stainless steel fittings towards the blade. It has a small and useful finger guard to fit in a pouch style sheath.

Helle knives are designed to retain their sharpness as a lifelong outdoors companion. But it is still important to take care of your knife and its sheath.

The Handle. Dry the handle with a soft cloth if wet and wax occasionally.

The Sheath. The leather needs to be impregnated occasionally with colourless impregnation agent (grease or wax) to keep supple. Dry the sheath carefully in room temperature if it becomes wet.

The Blade. Wipe the blade with a soft cloth if wet and treat with grease occasionally.

Use a diamond tool or a wet stone for sharpening. Place the knife bevel flat to the sharpening tool and work the entire blade. Work one side until you can feel a slight burr on the opposite side. Switch side and repeat the procedure until you feel the burr on the first side. You have now established an edge.

Remove the burr by stroking the blade gently over the sharpening surface on both sides, as if cutting very thin slices. Keep the bevel flat towards the sharpener and move from side to side until the burr is gone.

If the blade is very dull or damaged, use a fine-grained grindstone and plenty of water and sharpen until you have a raw edge. Use much cooling liquid and never sharpen on a dry stone. A hot-ground edge looses its heat treatment and ruins the blade.



Overall Length (mm) 235
Blade Length (mm) 105
Blade Thickness (mm) 3
Blade Material Sandvik 12C27 stainless steel
Blade Hardness (HRC) TBA
Blade Style Drop Point
Blade Grind Scandi
Blade Finish Satin
Tang Rats Tail
Pommel/Bolster Material` NA
Butt Cap Material NA
Handle Length (mm) 130
Handle Thickness at Thickest (mm) TBA
Handle Material Curly birch
Handle Colour Brown
Overall Knife Weight (g) 145
Sheath Material Leather
Sheath Colour Brown
Sheath Weight (g) 52
Knife Type Hunting Knife
Locking Type NA
Brand Helle
Model Alden No.76
Country of Origin Norway
Country of Manufacture Norway