CALL US : 1300 83 99 66

All Products


Important - These mounts are rated to withstand the recoil of any caliber up to .222. Using them on a higher caliber will be at your own risk. The mounts are designed to fit the any of the following torches ONLY: P-4 P-11 P-15 P-16 P-17 P-18 Any Wolf Eye torches with 1" body diametre and all other torches with 1" body diametre.   The single piece construction is light and as tough as steel. These mounts are ideal for smaller caliber rifles and can be put on or taken off within seconds without damaging the scope or the torch. Simply click onto the scope and click in the torch. No nuts or screws - You are ready to go!

Price: $35.00

These mounts are made from Acetal high strength, machinable nylon and are as tough as steel, but much lighter. Acetal is so tough that Mercedes Benz is making their higher ratio gears in their 6 speed boxes from this very material. The mounts are designed and are custom fitted by a well known custom gun maker from Sydney and they all come with lifetime manufacturers warranty. A single hex screw means that they can be mounted or taken off a rifle in less than a minute. These mounts are ideal if you have expensive gear that you do not want to scratch with steel mounts. Dimensions: Width: 25 mm   Hight: Standard (Ideal for scopes with objective bells of up to 60mm in diameter)  Torch diameter: 30mm, Bored for COAST HP7 torches. (Can also be used for LedLenser P7, but the torch will need to be wrapped with a small amount of tape to fill in the 1mm difference in the body diameter.  Scope diameter: Mount is machined to fit 30mm scopes & comes with a conversion sleeve for 25 mm (1 inch) scopes

Price: $29.95

Type: Linerlock; Closed: 5"; Blade: 4" l AUS-8A Stainless l Standard Edge l Satin Finish; Handle: Black l Zytel; Other Info: Thumb Stud(s) l Pocket Clip. Sub zero quenched steel blade with false top edge. Boxed.

Price: $100.00

Ti-Lite® tactical folders evoke the sleek speed and rebellious lines of the classic 1950's-styled switchblade. Unlike most switchblades however, they are legal to carry nearly everywhere. This Ti-Lite features a Carpenter CPM-S35VN Stainless steel blade with a bead blast finish, razor sharp edge and sturdy, needle sharp point. The CNC milled handles are forged from super tough 7075 Aluminum billets and are given an attractive bead blast surface and finished with a protective EDP (Electric Discharge Plating) coating. And for maximum strength and safety, the Ti-Lites has been equipped with the patent pending, stainless steel leaf spring locks (proven in tests to hold 130 lbs). For ease of carry, the Ti-Lites come equipped with a small, but unobtrusive steel pocket clip, and can be opened rapidly by using the thumb studs or by snagging a quillon on the edge of your pocket as you draw your knife out. SPECIFICATIONS Blade Length: Approximately 4.00" ~ 102 mm Blade Material: Carpenter CPM-S35VN Blade Style: Plain Edge Blade Thickness: Approximately 0.125" ~ 1/8" ~ 3 mm Closed Overall Length: Approximately 5.00" ~ 127 mm Open Overall Length: Approximately 8.75" ~ 8 3/4" ~ 222 mm Handle Material: Black Aluminum Pocket Clip: Right Hand Tip Up Stainless Steel Weight: Approximately 4.60 Ounces ~ 130 g Special Features: Made in Taiwan

Price: $195.00

Type: Linerlock; Closed: 7.125"; Blade: 5.875" l AUS-8A Stainless l Standard Edge l Satin Finish; Handle: Black l Zytel; Other Info: Thumb Stud(s) l Pocket Clip. Boxed. Made in Taiwan. 

Price: $130.00

14 3/4" overall. 7 1/4" 420HC stainless blade with black oxide finish. High impact black polypropylene handle. Lanyard hole. Black leather belt sheath. Weight: 1.9lbs  Country of Origin: El Salvador

Price: $110.00

Condor Claw Folding Shovel  20" overall. 12" shovel with black epoxy powder coating. Hardwood handle. Folds for easy storage. May be used as a pick, shovel or hoe. Country of Origin: El Salvador

Price: $75.00

CONDOR Tool and Knife traces its proud history back to 1787, the year Gebr. Weyersberg Company was founded in Solingen Germany.Over the generations, the world’s largest manufacturer of swords and knives found it necessary to expand its operations to other countries to better serve its customers. In 1964 the company built a new plant in Santa Ana, El Salvador and filled it with state of the art German equipment. Some of the original local employees who were sent back to Solingen for extensive training forty-six years ago are still working in the factory today turning out the finest quality machetes, shovels and other hand tools.   SPECIFICATIONS Blade Material 1075 High Carbon Steel Blade Finish Black Textured Powder Coating Handle Micarta Sheath Ballistic Nylon Sheath Blade Length 6” Overall Length 11-1/2” Blade Thickness 5.0 mm Weight 1.03 lbs. Made In El Salvador    

Price: $95.00

13 1/2" overall. 8" 420HC stainless blade with blasted satin finish. Full tang. Brown hardwood handle. Stylish brown leather belt sheath.

Price: $140.00

Condor Sabertooth Machete. 25" overall. 18" black epoxy powder coated 1075 high carbon steel machete blade with sawback. Black high impact polypropylene handle. Lanyard hole. Black ballistic nylon belt sheath. Made in El Salvador. 

Price: $105.00