CALL US : 1300 83 99 66

All Products


1075 Carbon Steel Kitchen Knife Blade Blank is a fast way to get straight into creating a Kitchen knife. All required is to tidy up the profile, grind the bevels, drill pin holes, heat treat and fit a handle. 1075 is suitable steel for new makers and experts alike, the ease of home heat treating and its excellent performance characteristics make working with 1075 easy. This blank is cut by waterjet so there is no heat-affected zone. Note: 1075 Carbon Steel Kitchen Knife Blade Blank comes annealed (soft). Alloy Composition: Carbon: 0.70-0.80% Manganese: 0.40-0.70% Sulfur: 0.050% Phosphorus: 0.030% Recommended Heat Treatment: Heat at 815°C. Quench in Houghton’s G Medium Quench Oil or a high flash point vegetable oil such as canola at 50-60°C. 2 tempering cycles for 2 hours each at around 175-200 degrees depending on desired hardness” – higher tempering temps are likely to leave 1075 a bit soft for knives. Recommended working hardness 60 – 65 HRC. Dimensions: 3.3 x 355 mm.

Price: $25.00

1075 Carbon Steel Chopper Knife Blade Blank is a fast way to get straight into creating a chopper knife. All required is to tidy up the profile, grind the bevels, drill pin holes, heat treat and fit a handle. 1075 is suitable steel for new makers and experts alike, the ease of home heat treating and its excellent performance characteristics make working with 1075 easy. This blank is cut by waterjet so there is no heat-affected zone. Note: 1075 Carbon Steel Chopper Knife Blade Blank comes annealed (soft). Alloy Composition: Carbon: 0.70-0.80% Manganese: 0.40-0.70% Sulfur: 0.050% Phosphorus: 0.030% Recommended Heat Treatment: Heat at 815°C. Quench in Houghton’s G Medium Quench Oil or a high flash point vegetable oil such as canola at 50-60°C. 2 tempering cycles for 2 hours each at around 175-200 degrees depending on desired hardness” – higher tempering temps are likely to leave 1075 a bit soft for knives. Recommended working hardness 60 – 65 HRC. Dimensions: 4.3 x 280 mm.

Price: $29.00

1075 Carbon Steel Utility Knife Blade Blank is a fast way to get straight into creating a utility knife. All required is to tidy up the profile, grind the bevels, drill pin holes, heat treat and fit a handle. 1075 is suitable steel for new makers and experts alike, the ease of home heat treating and its excellent performance characteristics make working with 1075 easy. This blank is cut by waterjet so there is no heat-affected zone. Note: 1075 Carbon Steel Utility Knife Blade Blank comes annealed (soft). Alloy Composition: Carbon: 0.70-0.80% Manganese: 0.40-0.70% Sulfur: 0.050% Phosphorus: 0.030% Recommended Heat Treatment: Heat at 815°C. Quench in Houghton’s G Medium Quench Oil or a high flash point vegetable oil such as canola at 50-60°C. 2 tempering cycles for 2 hours each at around 175-200 degrees depending on desired hardness” – higher tempering temps are likely to leave 1075 a bit soft for knives. Recommended working hardness 60 – 65 HRC. Dimensions: 4.3 x 210 mm.

Price: $25.00

The 325 grit Coarse diamond plate is ideal for honing badly worn edges to desired bevel angles quickly. This plate a reasonable sharp working edge, but it will not be razor sharp. Therefore, the blade would really need to be finished off, either in 650 or 1000 grit after the initial 325 run. 

Price: $60.00

The 1000 grit Fine diamond plate is ideal for finishing and polishing the sharpen edge to a fine razor finish. Please note that 1000 is much slower to work with and although it will give a slightly longer lasting edge, it is really ideal for thing like filleting knives, straight razors etc.  

Price: $60.00

The 650 grit Medium diamond plate is ideal for general sharpening. It is the plate that already comes with the Warthog set and produces very nice and even razor sharp (not poliched) edge. 

Price: $60.00

Multifunction cutlery in martensitic stainless steel 2CR14, polished mirror finish. Comprises a large spoon, a 5-pronged fork, a knife with a micro-serrated blade, a 4-spiral corkscrew, a can-opener and a bottle opener. Decorated transparent polymer handle. Magnetic assembly. 10cm Closed, 3.5cm Width, 4cm Thickness, 147g

Price: $60.00

With a rich bouquet of colours, this multifunction cutlery embodies the warmth and friendliness of summer’s return. Bring these fragrant notes with you no matter where you eat. Multifunction cutlery in martensitic stainless steel 2CR14, polished mirror finish. Comprises a large spoon, a 5-pronged fork, a knife with a micro-serrated blade, a 4-spiral corkscrew, a can-opener and a bottle opener. Decorated transparent polymer handle. Magnetic assembly. 10cm Closed, 3.5cm Width, 4cm Thickness, 147g

Price: $60.00

Multifunction cutlery in martensitic stainless steel 2CR14, dark grey titanium finish. Comprises a large spoon, a 5-pronged fork, a knife with a micro-serrated blade, a 4-spiral corkscrew, a can-opener and a bottle opener. Olive wood handle. Magnetic assembly. 10cm Closed, 3.5cm Width, 4cm Thickness, 147g

Price: $80.00

Opt for the advantages of Akinod multifunction cutlery, here adorned with a pattern inspired by one of Auguste Perret’s quintessential designs, to enjoy your lunch in comfort and style. The Akinod Multifunctional Cutlery 13H25 is a practical cutlery set with knife, fork and spoon. But also a bottle opener, can opener and corkscrew. In one set everything you might need for a camping trip, hike or picnic. The great thing about this set is that you click the parts on top of each other with the help of the built-in magnets. As such you make sure your set remains complete and can compactly store it. This also mean they won't roam around in your backpack, picnic basket or caravan. Multifunction cutlery in martensitic stainless steel 2CR14, polished mirror finish. Comprises a large spoon, a 5-pronged fork, a knife with a micro-serrated blade, a 4-spiral corkscrew, a can-opener and a bottle opener. Decorated transparent polymer handle. Magnetic assembly. Length: 10cm Closed Width: 3.5cm Width Thickness: 4cm Thickness Weight: 147g

Price: $60.00